| |
The Baroque Trumpet Mouthpiece
The Baroque trumpet mouthpiece differs from the modern mouthpiece in several important ways. The cup is more hemispherical or bowl shaped, the shoulder of the cup leading into the backbore has a very sharp angle, the backbore is often stepped, and the rim is generally flat, not rounded. While mouthpieces in the Baroque era, like today, were produced in many sizes and configurations, the above characteristics were common. Mouthpieces were usally larger than todays standard mouthpiece. The general characteristics are shown in Andrew Naumann's illustration below.

©Andrew Naumann
Many players prefer rounded, modern rims, and both Egger and Naumann offer these mouthpieces as well as the more "authentic" flat rimmed models.
Naumann Baroque Trumpet Mouthpieces
Silver Plate - $90.00
Gold Plate - $120.00
Naumann Baroque trumpet mouthpieces come in 7 sizes.The Principale is a large cup, mainly used for low register playing. The Standard size is similar to the popular Salzburg #6 mouthpiece many manufactures make. It is a medium cup that works well for all around playing. The Clarino size is the smallest and is an excellent choice for extreme upper register playing. All the mouthpieces have a characteristic bowl shaped cup with a sharp inner shoulder (to the throat).
NEW Bauguess Model Baroque Mouthpiece
Barry Bauguess' personal Baroque Mouthpiece.
Bauguess Model in Silver Plate - $90.00
Bauguess Model in Gold Plate - $120.00
Naumann Mouthpiece Models
Bauguess 5B - Historical flat rim - ID .641 with #19 throat
Eklund - Historical flat rim with a modern B cup - ID .670 with #19 throatPrincipale - Largest mouthpiece with historical flat rim - ID .725" with #17 throat
Salzburg - Similar to Salzburg #6. Historical flat rim - ID .710" with #18 throat
Clarino - Smallest historical rim mouthpiece - ID .695 with #18 throat
C 2 - Historical backbore with modern 1C rim and cup with #22 throat
C 3 - Historical backbore with modern 1-1/2C rim and cup with #22 throat
C 4 - Historical backbore with modern 3C rim and cup with #22 throat
Egger Historical Mouthpieces
In collaboration with Friedemann Immer and Jean-Françoise Madeuf, Egger has been able to produce a new mouthpiece model every few weeks. This concerns above all, an increase to the Bull series and a completely new series of SI (Salzburg/Immer) mouthpieces that while similar to the Salzburg models, produce a lighter, brilliant sound and more flexibility in intonation.
OPT Mouthpieces
Rainer Egger has optimized the SI Series of mouthpieces to facilitate playing in the high register and with trumpets without holes. The OPT Series is available in B9, SI5, SI6, and SI7 sizes.
Bauguess Model B9 and B9OPT Mouthpieces
Rainer Egger is producing copies of Barry Bauguess' personal mouthpieces in both the SI and SIOPT configurations. Slightly smaller than the SI7 Series, the B9 and B9OPT are the personal choice of Barry Bauguess.
Egger Salzburg/Immer Mouthpieces
Silver Plate - $155.00
Model Description Cup Ø mm Rim Ø mm |
Throat Ø mm |
SI3 |
Principale mouthpiece 18.6 30.37 |
4.3 |
SI4 |
Principale mouthpiece 18.2 29.55 |
4.3 |
SI5 |
Copy of Haas mouthpiece
(A littler larger than a Bach 1) 17.7 28.5 |
4.2 |
SI5OPT |
Optimized for high register and no holes
(A littler larger than a Bach 1)17.728.5 |
4.2 |
SI5R |
Same as SI5, but with rounded rim
(A littler larger than a Bach 1) 17.7 28.5 |
4.2 |
SI6 |
Good for middle & high register
(Close to a Bach 1 rim) 17.3 27.3 |
4.2 |
SI6OPT |
Optimized for high register and no holes
(Close to a Bach 1 rim) 17.327.3 |
4.2 |
SI6R |
Same as SI6, but with rounded rim
(Close to a Bach 1 rim) 17.3 27.3 |
4.2 |
SI7 |
Good for high register
(Close to a Bach 1-1/4C rim) 16.66 27.4 |
4.0 |
SI7OPT |
Optimized for high register and no holes16.6627.4 |
4.0 |
SI7R |
Same a SI7, but with rounded rim 16.66 27.4 |
4.0 |
|
Copy of Barry Bauguess' Mouthpiece 16.3 27.3 |
4.0 |
|
Copy of Barry Bauguess' Mouthpiece, Optimized for high register and no holes 16.3 27.3 |
4.0 |
|
|
|
In Stock Trumpet Mouthpieces
We currently stock the most popular sizes of Naumann, Crispian Steele-Perkins, and Egger mouthpieces and can special order all models.
All other models are available by special order. Email Barry to order other models.
Egger Mouthpieces
$155.00 in Silver Plate
Naumann Mouthpieces
$90.00 in Silver Plate
|
|